All About Daily Lancaster UK News

How to Clean Coffee Maker with Vinegar?

Jun 21

How to Clean Coffee Maker by using Vinegar?

Coffee makers form the basis of many homes. Every person needs a cup of coffee to get their morning started. However, after you've been using your coffee maker for long enough, the machine gets filthy and disgusting; that's when people want to buy new ones! There's a better method of cleaning your coffee maker using vinegar rather than replacing it. If you're interested in learning more, continue reading this blog post!

What proportion of vinegar to water is used to clean a coffee maker?

What are you looking for?



Utilize a paper towel, or a clean, dry cloth


A small bowl

What Do you Need to Do Step-by-Step?

Fill the coffee pot with equal parts water and vinegar. The machine will make the mix by turning it on. Switch off the machine and dispose of the solution.

Cleanse the inside of the carafe with a clean, dry cloth or towels. If you notice mineral deposits, sprinkle coarse salt in the inner pot. Pour one cup of water that is fresh into the reservoir. Follow that with two cups of white distillation vinegar.

Run an entire cycle, like usual, using just water and no ground coffee. To get the best results, throw away both brewing solutions after they have been completed. 

Repeat the steps three times until all trace traces of residue have been removed from the system to ensure optimal flavor even after several usages without dealing. Ensure thoroughly rinse with fresh water before making your next coffee pot.

Store the vinegar mixture in an additional container for future use if desired rather than pouring it down the sink. The brew cycle should be run to remove any remaining vinegar in the reservoir.

Tips: It's important to remember that cleaning your coffee maker with the vinegar could take some time. Clean your coffee maker using a vinegar ratio of 50/50 mixture of tap water that is cold and white vinegar, either distilled or filtered after the brewing process has been completed. To achieve the best results, allow it to sit for a night and repeat the brewing process without pods or filter baskets inside the brewer. When making the next pot, rinse thoroughly. Ensure the coaster is under the carafe during this period to prevent drips from spilling onto counter surfaces as the gasket will be wet because of a solution used to wash out all the parts, including the metal holder. The holder was black and copper, the holder of the metal from which the coffee is released.

After that, your coffeemaker should look fresh and clean. If for whatever reason, the vinegar did not work to get rid of the stains on your machine, you can try an exclusive cleaner specifically designed for this purpose.

Cleaning Tips for Coffee Makers

Once you are ready, you can ensure that you fill your coffee maker with one-quarter inch of regular vinegar. After that, plug in and start the machine as usual. It will begin to make a brew using only vinegar (not coffee). Allow it to run its cycle until it finishes the brewing process into a cup. Now comes the cleaning part. Switch off the power to prevent everything from running/brewing for now; then unplug it! You don't need to remove any pieces yet, but you can use this time to get rid of any dust particles in the vicinity of specific areas. This includes drip trays, carafes, decanters, and more. Wash all the parts thoroughly with warm water if it is possible. If you aren't able to, use a damp cloth to wipe them clean until they're clean and free of any particles/residue.

Carefully remove the top portion of the cover on the coffee maker to scrub its insides. Be careful in this process. Use an old toothbrush with the addition of rubbing alcohol with water to scrub away residue inside where pieces attach with a gentle motion. Rinse thoroughly under warm running water again. Let all components, including the cover mechanism, completely dry before rebuilding.

Fill the machine with pure white vinegar, keeping out any coffee grounds. Reattach the top securely before plugging it into the machine to make one more vinegar cycle (not using any coffee or water). Once this process is complete, turn off the power source or breaker box and then unplug it AGAIN. Then, wash the unit under warm water to eliminate any remaining moisture. Shake out excess moisture by hand after washing the surfaces. Leave the cover off until completely dry inside, which could take up to 24 hours depending on the humidity in your area and so on.

Finally! It is now possible to reassemble the machine you cleaned up and not worry about any residue from the previous steps. Dry the air entirely If possible, you can use a clean lint-free cloth or paper towels to dry it thoroughly before starting the new brew cycle with fresh water only (no coffee ground). This is a crucial step! This step is crucial!



Make sure not to run any solution further through the system, including plain old tap water with no white vinegar, since particles or residues left behind could impact the future flavor results. Get rid of the first two batches of brewed solution and the carafe contents once per month for the best overall efficiency over time. Avoid mixing cleaner solutions in a row, as it could cause harm to your system.

You may not have the time to go through each step. Instead, flush water through your system after it has cooled entirely without coffee grounds or vinegar. This will eliminate any leftover flavors brewed before the previous one from affecting the next brew. However, this is not a 'deep' cleaning method, so beware!

Contact NW Maids to learn more:


Contact the NW Maids Portland location:

NW Maids House Cleaning Service of Portland

5020 NE Martin Luther King Jr Blvd, 

Portland, OR 97211, United States